Bizon Eplikator Hybrid Shadow Google Pixel 11 Pro [2 PACK]

2 pieces of privacy hybrid glass with applicator Bizon Eplikator Hybrid Shadow

Google Pixel 11 Pro

Privacy hybrid glass with easy application for Google Pixel 11 Pro

This is not an ordinary box!

If during the installation of a new screen protector you suddenly start looking around for a household member with the steadiest hand - Bizon Eplikator Hybrid Shadow is for you. It is an innovative mounting system, combined with the packaging, that helps you get through the application without nervous aiming, constant adjusting and wondering whether the glass just landed two millimeters too far to the left. Here, opening the package is actually the first step of the installation.

Inside are two matte hybrid glasses with a privacy filter, which look after both the display's safety and who peeks over your shoulder. The flexible construction protects the screen from scratches and does not crack or crumble.

Because usually after opening the box the story ends. With the Eplikator - it's only just beginning.

• Application system prepared for 2 applications
• Type: privacy hybrid glass
• Glass hardness: 6H
• Glass thickness: 0,25 mm
• Viewing angle: 28°
• Light transmission: 60%
• Matte surface reducing reflections
• Anti-scratch layer protecting against scratches
• Oleophobic coating reducing the visibility of fingerprints

How does the Eplikator system work?

Imagine the glass approaching the screen and it's just about to land perfectly... and at that very moment a dog nudges you with its tail, and the protector ends up halfway off the screen. Meanwhile the Eplikator minimizes such surprises and - importantly - does not require experience straight from a GSM service center!

The system is ready to use right after opening - you don't have to put the glass into the frame by hand or set its position relative to the screen. Importantly, the whole mechanism is prepared for two applications at once. And so that a classic 'okay, what now?' doesn't appear along the way, you can tell the system's elements apart in three ways: by color, number and shape. Instead of guessing, you follow the markings and step by step reach the goal.

Illustrative photo, the glass will be matched to your phone model

When protection meets privacy - privacy glass

Open space, queue, bus. You don't have to make an effort for an extra pair of eyes to settle on your smartphone screen. 

Hybrid Shadow privacy glass uses a 28° privacy filter that limits the visibility of the display for people looking from the side. Instead of a free show for your neighbor, you get greater freedom when using your phone in public places.

The matte finish helps reduce reflections, the oleophobic coating fights smudges and fingerprints, and light transmission at 60% supports the privacy effect by slightly dimming the image. The whole thing is 0,25 mm thick with 6H hardness, protects against scratches, remains flexible and does not crack or crumble.

And prying eyes? Let them find some other entertainment.

Illustrative photo, the glass will be matched to your phone model

Glass dimensions

The basic accessory for protection of a mobile device, besides the glass, is a case. To make sure the glass is compatible with the case, remember that:

• the dimensions of the glass must be smaller than the internal dimensions of the cover
• the case must not overlap the screen

Glass dimensions: 14,91 x 6,82 cm

(length - width)

Polish design where the cardboard does more

The Eplikator is meant to make installation easier, but its cleverness doesn't end at the screen. The whole product is made in Poland, and its construction was planned so that each element has its own specific task, while limiting unnecessary waste.

The frame is made of pure cellulose, and the pins holding it are made of PLA - a biodegradable polymer obtained from renewable raw materials, including corn starch. On top of that there's packaging made of thick corrugated cardboard, which definitely does not intend to be just a box.

The same small carton protects the product, is part of the mounting system and can serve as a shipping package. Thanks to this, instead of adding more layers and elements, the Eplikator uses what it already has under... the carton.

How to apply the glass with the Eplikator? Quickly!

Before you start installing, check whether the Eplikator is intended for your phone model. The frame is matched to a specific device, so the right variant matters here. Make yourself comfortable and let's get to work!

1. Clean the screen with a wet cloth
   Wipe the display surface thoroughly to remove streaks, greasy marks and other dirt.
2. Dry the screen with a dry cloth
   Take a dry cloth and wipe the screen dry, not forgetting its edges.
3. Get rid of dust particles
   If you notice dust specks on the screen, use the round Dust Absorber sticker. Apply it at spots that need cleaning.
4. Put the phone into the frame
   Place the device in the Eplikator screen-down, then gently press it.
5. Reach for the right sheet
   For the first application, pull out the white square sheet marked number 1. For the second application, use the green round sheet with number 2. Color, number and shape help you quickly recognize the right element.
6. Finish the installation
   Remove the phone from the Eplikator and peel off the protective film. If small air bubbles remain under the glass, use the mini squeegee, moving them gently toward the nearest edge.

And done! The glass has landed, and the Eplikator is ready for the second application.

Complete application kit

Bizon Eplikator Hybrid Shadow, besides 2 pieces of privacy glass, also includes:

• 2 dry microfiber cloths
• 2 wet cloths for cleaning the screen
• 4 round Dust Absorber stickers for removing dust particles
• 1 mini squeegee

Bizon focuses on packaging designed to reduce waste, using only trace amounts of plastic!